LG ARNH08GK3A2 Installation Manual page 28

Accessories Installation
Final Check
• DIP switch setting :
Set DIP switch No. 8 to ʻONʼ. Otherwise, the unit can not recognize the thermostat.
• Remote Controller :
- ʻThermostatʼ icon is displayed on the remote controller.
- Button input is prohibited.
NOTICE
Thermostat Operation with Remote Controller
Following features are permitted when thermostat is installed :
• SET TEMP button
• VIEW TEMP button
• Temperature adjusting button(*)
• Sanitary water heating button
(*) : The unit is not turned on/off according to the setting temperature at the remote controller.
It is turned on/off according to the thermostat signal.
Following features are NOT permitted when thermostat is installed :
• Operating mode (heating/ weather-dependent) selection
• Time scheduling
• Operation On / Off
Sequence of thermostat operation
- How to set the heating temperature when thermostat is connected to the Hydro Kit.
Set thermostat
to the heating mode
28 Hydro Kit
Thermostat Icon
Adjust the heating temperature,
using the remote controller