LG ACP IV ACP Owner's Manual page 117

AWHP
Item
Select a device type.
Device Type
y AWHP
Enter the device name.
Unit Name
(20 Characters)
y Up to 20 characters.
Type the central control address of the device.
Address
y A central control address value is a number between 00 and FF. You
(00-FF)
Type the device model.
Model
(20 Characters)
y Up to 20 characters.
Type the maximum capacity in thousand BTUs for devices.
Capacity
y Up to 5 characters.
y The capacity of the actual device cannot exceed the input value.
y It is used when you need to add several devices of the same type.
y Select check box, input the desired number of devices, and the devices
Add at once
Based on
the current
Select the current temperature display base(water outlet/water inlet/indoor)
temperature
display
cannot type the same value for similar devices.
are added at once, and the device name and address are automatically
increased.
(During the Add all, if duplicate address value occurs, the information
notice message for the duplicate address is displayed.)
USING THE PROGRAM
Description
109