Configure an A-240Z-A CPE
8.2.8
Procedure 51
124
Field
DS Packet Loss
Internet Status
Latency
DNS Response Time
Port Mirror
(2 of 2)
2
Configure the test times if desired.
3
Click Refresh to update the data.
4
STOP. This procedure is complete.
Smart Home configuration
The Smart Home configuration feature is used to manage the devices for home
monitoring systems. Both Zwave and Zigbee are supported. The Smart Home
configuration feature supports:
•
status retrieval
•
configuration
•
maintenance
Smart Home status retrieval
1
Select Smart Home>Status from the left menu in the Ethernet Gateway window.
The Smart Home Status window appears; see Figure 60.
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Description
The number of downstream packages lost
Whether the broadband connections is active (UP) or not (DOWN)
This test is used to determine the lowest round-trip time in milliseconds by pinging
the target server multiple times
Click Latency Test to specify the time for the test
The default is weekly, performed at idle to a public server
This test is used to determine the lowest round-trip time in milliseconds by sending
a request to the target DNS server
Click DNS Response Test to specify the time for the test
The default is weekly, performed at idle to a public server
Select Source Port, Destination Port, Direction (Up or Down) and Status (Enable
or Disable)
Issue: 01