Wall Mounting; Specifications - Panasonic KX-TGA405 Installation Manual

1
2
Connect the unit.
L Use only the supplied Panasonic AC adaptor PQLV219.
L When the unit is turned on, the STATUS indicator and q indicator light amber
for about 2 seconds.
2
Confirm that the STATUS indicator and q indicator light green. (The unit is
3
ready for use.)
L If the indicators do not light green, re-position the unit in a place where the
indicators light green.
LTo stop the registration tone, press [LOCATOR] on the base unit.
Note:
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
L The unit can support a maximum of 2 handsets at a time.

Wall Mounting

Drive the screws (not supplied) into the wall. Mount the unit, then slide it down.

Specifications

N Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)
N Frequency range: 1.92 GHz to 1.93 GHz
N RF transmission power: 115 mW (max.)
N Power source: 120 V AC, 60 Hz
N Power consumption: Standby: Approx. 0.0 W, Maximum: Approx. 0.0 W
Hook
(120 V AC, 60 Hz)
Press plug firmly.
2
Screws
37.0 mm
(1 15 /
32
1.0 W,
_ 3 _
inches)
1.8 W