IP-HE950 Hardware User's Guide
2.3.2
Connection to SDI input equipment
Connect SDI input equipment to the SDI output of the IP-HE950D (decoder).
Connect a BNC cable to the SDI-OUT connector of the IP-HE950D. A signal is terminated with
75 Ω.
The following figure shows how to connect SDI input equipment.
See
For details on connectors and cables, refer to "4.2 Cable and Connector
Details." For electrical specifications, refer to "A.2.3 Interface
specifications."
Figure 2-7 SDI input equipment connection
Chapter 2 Installation and Connection
Copyright 2017 FUJITSU LIMITED
27