Page 3
Read and understand tool labels and all of the operating instructions, safety precautions and warnings in this manual before operating or maintaining this nailer. Failure to follow warnings could result in DEATH or SERIOUS INJURY. - 3 -...
Page 4
1. OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE SHIELDS. When operating the Nailer, always wear safety glasses with side shields, and make sure others in work area wear safety glasses, too. Safety glasses must conform to the requirements of American National Standards Institute, ANSI Z87.1 and provide protection against flying particles both from the front and side.
Page 12
NEVER point tool at yourself or others in work area. Keep fingers AWAY from trigger when not driving nails to avoid accidental firing. Choice of triggering method is important. Please read and understand “METHODS OF OPERATION” found below. Operators and others in work area MUST wear safety glasses with side shields which conforms...
Page 20
Issued by Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo 108-6020, Japan Distributed by PO Box 970 Braselton, GA 30517 450 Export Blvd. Unit B, Mississauga ON L5S 2A4 Code No. C99067263 N Printed in Japan...