Switching On And Off; Switching Off For Longer Periods Of Time - Miele F 123 Ui-2 Operating And Installation Instructions

Switching on and off

Before using for the first time
^ Clean the inside of the appliance and
the accessories with luke warm water
and a little washing-up liquid, and
then dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^ Press the On/Off button in.
The On/Off and the alarm off indicator
lights come on. An alarm sounds and
the appliance starts cooling.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Switching off the alarm
^ Press the alarm off button.
The alarm will stop. The alarm off
indicator light remains lit until the
temperature which has been set is
reached.
Downloaded from Fridge-Manual.com Manuals
12
Cool pack
Place the cool pack in the top drawer.
The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^ Press and release the On/Off button.
All the indicator lights will go out and
the cooling system will switch off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ switch off at the wall socket and
withdraw the plug,
^ defrost and clean the appliance, and
^ leave the door ajar to air the
appliance.