40
en | Operation
8.2
Using the microphone button
Figure 8.2: Discussion Device with participant's button fitted
Use the microphone button (3) on your Discussion Device to activate and deactivate your
microphone (1) as required. The LED indicator (4) above the microphone button and light-ring
(2) in the head of the microphone will indicate the status of your Discussion Device. The
following color codes are used:
White (possible‑to‑speak indication)
This indicator is only above the microphone button and not in the light-ring. Note: In voice
activated mode this LED is off.
–
–
Green
–
–
Green flashing
–
–
Red
–
2014.09 | V1.0 |
6 1
6 2
6 3 6 4
You can activate your microphone immediately by pressing the microphone button.
Your request to speak will not be added to the waiting list.
Your request to speak has been added to the waiting list.
The waiting list can be viewed and managed in the web browser.
Your request to speak is first in the waiting list.
As soon as the active speaker disables their microphone button you will be allowed to
speak.
Your microphone is active; you are allowed to speak.
Operation manual
Digital Discussion System
Bosch Security Systems B.V.