When Connected Using An Hdmi Cable - Pioneer BONUS VIEW BDP-51FD Operating Instructions Manual

Problem Check
Multi-channel sound is not Is multi-channel sound selected?
output (continuous).
Is Audio Out set to audio formats supported by the connected
AV receiver or amplifier?
Are Audio Output Mode and Speaker Setup properly set?
Digital audio signals are not Is Audio Out set to audio formats supported by the connected
output from the DIGITAL AV receiver or amplifier?
OUT output (COAXIAL/
DIGITAL) terminals (analog
audio signals are output).
Noise can be heard when Is the connected AV receiver or amplifier compatible with DTS
outputting DTS Digital Digital Surround?
Surround signals.
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT (COAXIAL/OPTICAL)
terminals.
Secondary audio or Is HDMI Audio Out properly set?
interactive audio is not
Are Dolby Digital Out and DTS Out properly set?
output.
Sound is fast or slow. When an HDMI cable is connected, are audio signals being
output from devices connected with cables other than HDMI
cables?
Files recorded on discs Is the disc one that is playable on this player?
cannot be played.
Is the file one that is playable on this player?
Is the file protected by DRM?
A message indicating low
memory (local storage)
appears while playing a BD-
ROM disc.

When connected using an HDMI cable

Problem Check
HDMI indicator does not Is the video output terminal other than the HDMI OUT terminal
light. selected?
Is the input of the connected HDMI device properly set?
Is a DVI device connected?
Remedy
Use the menu screen or AUDIO to switch the disc's sound to
multi-channel.
• Read the operating instructions of the connected AV receiver
or amplifier and check the supported audio formats.
• Set Audio Out properly (page 40).
• When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to
Multi-channel (page 40).
• Set Speaker Setup properly (page 40).
• Read the operating instructions of the connected AV receiver
or amplifier and check the supported audio formats.
• Set Audio Out properly (page 40).
If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the DIGITAL OUT terminal,
set DTS Out to DTS  PCM. Noise will be heard if DTS Out is
set to DTS (page 40).
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player's DIGITAL OUT (COAXIAL/OPTICAL)
terminals. The signals are automatically converted to under 96
kHz for output.
Set HDMI Audio Out to PCM (page 41).
Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1
(page 40).
When this player is connected by HDMI cable to a Pioneer AV
receiver or amplifier compatible with the PQLS function via
HDMI connection, the PQLS function is activated when playing
CDs. Because of this, the sound output from components
other than the ones connected by HDMI cable may be fast or
slow. If this happens, set PQLS to Off (page 41).
Check whether the disc is one that can be played on this player
(page 8).
• Check whether the file is one that can be played on this
player (page 10).
• Check whether or not the file is damaged
Files protected by DRM cannot be played.
Erase the BDMV data (page 24).
Remedy
The HDMI indicator lights when video signals are being output
from the HDMI OUT terminal. Press VIDEO SELECT to switch
to the HDMI OUT terminal (page 24).
Read the HDMI device's operating instructions and set the
input properly.
Read the DVI device's operating instructions and check
whether it is compatible with HDCP.
07
53
En