Ring And Message Led; Entering Text; Changing The Text Input Mode; Using The T9 Mode - LG WIT-400H Operation Manual

Table of Contents

Advertisement

WIT-400H User Manual
Issue: 0.1A
[VOL UP], [VOL
DOWN]
PTT
0-9
Dial keys
Memo) Manner mode is different with vibration mode. Manner mode affects all of rings and tones, but
vibration mode affects only rings.
4.1.2

Ring and Message LED

The ring and message LED located at upper right side is turned on when an incoming call / a new message is
received. When the ring OFF function is enabled, ring tone is not heard but ring LED is flashing. The ring LED
solid on for a Message waiting indication.
4.3

Entering Text

You can enter alphanumeric characters using the keypad. For example, setting a name in the Phone Book, writing a
message, scheduling events in the schedule all require entering text.
Following text input methods are available in the handset.
4.3.1

Changing the Text Input Mode

1. When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the
upper right corner of the display.
2. By pressing
shortly, you can toggle and change the input mode among [Abc], [ABC], [T9abc], [T9Abc],
[T9ABC], [123], [abc]
4.3.2

Using the T9 Mode

The T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you
press each key, the handset begins to display the characters that it thinks you are typing based on a built-in
dictionary. As new letters are added, the word changes to reflect the most likely candidate from the dictionary.
1. When you are in the T9 predictive text input mode, start entering a word by pressing keys '2' to '9'. Press one key
per letter.
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG-Nortel Co.Ltd
In idle mode
It is volume up and down of the key tone.
In voice mode
It is volume up and down of the voice.
In ringing mode
It is volume up and down of the ring.
In idle mode
Press this button and hold, PTT works. Other parties of your
PTT group can listen your speech..
If you release this button, PTT will be finished and you can
listen.
In voice mode
This button doesn't work.
Standards dial buttons
18
Date: 28/July/2009

Advertisement

Table of Contents
loading

Table of Contents