Product Description; Intended Use; Prerequisites; Hardware - Bosch BEA 060 Original Instructions Manual

en 2� | BEA ��� | Product description
3.

Product description

�.1

Intended use

The exhaust gas analyzer BEA 060 permits the user-
friendly performance of exhaust gas measurements on
gasoline vehicles.
The range of test specimens includes the entire spec-
trum of gasoline road vehicles on which emission me-
asurements have to be taken during workshop inspec-
tions, both to comply with legal requirements and for
the purposes of localizing and rectifying faults.
The BEA 060 can be used as a stand-alone unit and
with the BEA 550.
�.2

Prerequisites

The BEA 060 can only be operated by way of a PC/
Laptop and together with SystemSoft BEA-AU-OBD.
�.2.1

Hardware

R
PC/Laptop with DVD/CD drive and Windows XP or
WIN 7 operating system
R
CPU X86 (Celeron M): At least 1 GHz,
recommended Dualcore 1.66 GHz
R
Available space on hard disk: At least 1 GB
R
RAM: At least 1 GB
R
Two vacant USB interfaces for the Bluetooth USB
adapter and for a USB connecting cable
�.2.2

Software

SystemSoft BEA-AU-OBD installed on PC/Laptop.
�.�

Scope of delivery

Designation
BEA 060
BEA 030
Case
with sticker
Software package with
SystemSoft BEA-PC and AU vehicle data
Coarse filter
Hose for BEA 060 and
exhaust gas sampling probe (gasoline)
USB connecting cable (5 m)
Oil temperature sensor
Battery connecting cable B+/B–
Connecting cable
for cigarette lighter socket (BEA 030)
Primary adapter cable
Power supply unit for BEA 030
2x power cord (1.5 m) for
BEA 030 and BEA 060 power supply unit
Cable tie for power cord
strain relief
USB connecting cable (3 m)
Bluetooth USB adapter
Operating instructions
|
1 689 989 112 2012-11-26
�.4
Information on special accessories can be obtained
from authorized Bosch dealers.
�.5
!
The BEA 060 is only to be operated in enclosed
workshop areas. Protect the BEA 060 against
moisture.
The BEA 060 consists of a computer PCB with tempera-
ture, speed and exhaust gas measurement. Communica-
tion between the PC/Laptop and the BEA 060 can take
place either by way of a Bluetooth connection or a USB
connection.
18
17
16
15
14
Fig. 1:
1 Coarse filter GF2
2 Coarse filter GF3
3 Mains connection
4 Holes for cable tie (power cord strain relief)
5 Measurement gas inlet
Order number
6 Activated charcoal filter AF1
7 O sensor
1 687 023 613
2
8 Measurement gas outlet
1 687 023 577
9 Condensate outlet
1 685 438 626
10 Test gas inlet
1 681 105 271
11 NO sensor
1 687 005 087
12 Connection for cigarette lighter socket connecting cable
13 USB connection
1 687 432 005
14 Connection for connecting cable 1 684 463 810
1 680 703 043
15 Connection for oil temperature sensor
1 680 790 049
16 LED
1 684 465 563
17 On/Off button
1 687 230 068 18 Carrying handle
1 684 463 822
Special accessories
1)
1 684 463 547
�.5.1
1 684 460 196
1 687 023 620
LED
1 684 461 119
Off
1 681 316 008
Alternate orange and green flashing
at one-second intervals
1 684 465 562
Rapid alternate orange and green
flashing
1 687 023 449
1 689 979 922
Rapid alternate orange and green
1 689 989 112
flashing (BEA software not started)
Red light

Special accessories

Description of unit

BEA 060
O2 AF I
N0
BDM 300
11-16V
20 W
13 12 11 10 9 8 7 6
BEA 060
1)

LED status

GF 3 GF 2
1
2
3
459907_1Ko.eps
5 4
1)
to BDM 300
1) 1)
Status
BEA 060 off
BEA 060 on and rea-
dy for operation
USB or Bluetooth
communication with
BEA software
Firmware defective
BEA 060 defective
Robert Bosch GmbH