Getting Started; Important Procedures; Cautions And Warnings; Inspection Checklist - GE C60 Instruction Manual

1 GETTING STARTED

1 GETTING STARTED 1.1 IMPORTANT PROCEDURES
Please read this chapter to help guide you through the initial setup of your new relay.
Before attempting to install or use the relay, it is imperative that all WARNINGS and CAU-
TIONS in this manual are reviewed to help prevent personal injury, equipment damage, and/
or downtime.
WARNING CAUTION
• Open the relay packaging and inspect the unit for physical damage.
• Check that the battery tab is intact on the power supply module (for more details, see the section BATTERY TAB in this
chapter).
• View the rear name-plate and verify that the correct model has been ordered.
• Ensure that the following items are included:
• Instruction Manual
• Products CD (includes URPC software and manuals in PDF format)
• mounting screws
• registration card (attached as the last page of the manual)
• Fill out the registration form and mail it back to GE Multilin (include the serial number located on the rear nameplate).
• For product information, instruction manual updates, and the latest software updates, please visit the GE Multilin Home
Page at http://www.GEindustrial.com/multilin.
If there is any noticeable physical damage, or any of the contents listed are missing, please contact GE
Multilin immediately.
NOTE
GE MULTILIN CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:
GE Multilin
215 Anderson Avenue
Markham, Ontario
Canada L6E 1B3
TELEPHONE: (905) 294-6222,
FAX: (905) 201-2098
E-MAIL: info.pm@indsys.ge.com
HOME PAGE: http://www.GEindustrial.com/multilin
GE Multilin
Figure 1–1: REAR NAME-PLATE (EXAMPLE)
1-800-547-8629 (North America only)
C60 Breaker Management Relay

1.1 IMPORTANT PROCEDURES

1.1.1 CAUTIONS AND WARNINGS

1.1.2 INSPECTION CHECKLIST

1
1-1