Table of Contents
Advertisement
UW93_event_080102
1/4/08
12:01 PM
Setting up
Attaching the speakers to the DVD receiver
a
a
You will have received four speaker cables.
Each one is colour-coded by a band near each end and wires one of the
four speakers to the DVD receiver.
b
b
Connect the wires to the DVD receiver.
Match each wire's coloured band to the same coloured connection termi-
nal on the reverse of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).
c
c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
:
the colour coding
COLOUR
SPEAKER
Green
Centre
Orange
Sub Woofer
Red
Front
White
Front
Page 5
POSITION
Above screen, directly in front of you.
In front of you, to the right of the
screen.
In front of you, to the left of the
screen.
Attaching the Wireless Tranmitter to the DVD
receiver
a
a
Connect the adaptor (DC 7V) to the outlet
and transmitter.
b
b
Connect the SOUND SIGNAL connector of the Wireless
Transmitter and rear (right, left) speaker of connectors of the
main set with the sound signal cable.
c
c
Connect the Ground cable to the DVD receiver.
Be sure to connect the ground cable rear panel of the unit by using the
screw in rear panel. If this is not connected, the transmitter will not func-
tion.
5
Advertisement
Table of Contents
