This Welcome document provides information about system requirements and an overview of how to set up the TOSHIBA GA-1310 so that you can begin printing. It describes the initial tasks you must perform and points you to sections in the user documentation where the procedures are described in detail.
ELCOME About the documentation This document is part of a set provided to users and system administrators of the GA-1310. The documents are on the User Documentation CD and are in PDF (Portable Document Format). These files can be viewed online or printed using Adobe Reader. When viewed online, these files contain links and cross-references that allow you to quickly and easily locate needed information.
Reader, you can double-click a PDF icon to open the file. You can search for a word or phrase across the GA-1310 documentation set by examining all the documents within a specific language folder on the User Documentation CD. For information about using this and other features of Reader, see the Help that accompanies the application.
GA-1310 documents, see page These instructions assume that a service technician has unpacked and connected the GA-1310 and that the GA-1310 and copier are powered on. In some cases, initial print device settings may be required. See Configuration and Setup.
3 Press Configuration. The Configuration page prints. 4 Review the default GA-1310 settings on the printed page and determine if they are compatible with your network environment. If you change these settings, print another Configuration page to verify the changes.
Set up the GA-1310 from the copier touch panel 1 Make sure that the information screen on the copier touch panel reads Idle. If Printing or RIPping appears, the GA-1310 is processing, and you must wait until the system finishes and reaches the Idle state.
The Add Standard TCP/IP Printer Port Wizard dialog box appears. 6 Click Next. 7 Type the IP address or GA-1310 DNS name and click Next. 8 If the Standard TCP/IP Port Wizard window appears, select the Device Type and click Next.
Page 10
You can also download printer drivers from the Download WebTool. 12 Select the GA-1310 printer driver as your printer and click Next. 13 Type a name for the GA-1310 in the Printer name field, indicate whether you want to make it the default printer, and then click Next.
7 Select Update Fiery Driver When Opened to display the printer’s current default settings when the printer driver is opened. 8 Click Update. Options such as finishing units that are installed on the GA-1310 are displayed in the printer driver and are available the next time you print a job. 9 Click OK.
1 From your application, choose Print from the File menu. 2 Select the GA-1310 printer driver and click Properties. 3 Specify GA-1310 job options, such as Copies and finishing options, and then click OK. 4 Click OK again. For information about printing jobs from a Windows computer, see Printing from Windows.
ELCOME System requirements for user computers To install the GA-1310 user software on a Windows or Mac OS computer, the computer must be equipped with a built-in or external DVD drive. The following table lists the minimum system requirements. Minimum requirements for...
Page 14
A monitor and video memory that supports 16-bit color at a minimum resolution of 800 A TCP/IP-enabled network and the GA-1310 IP address or DNS name Web Services enabled on the GA-1310 Command WorkStation Windows-based computer with a 1.0GHz or greater...
GA-1310 O SHUT DOWN THE 1 Press and hold the On/Off button on the copier for 2 seconds. 2 After the LED display on the GA-1310 turns blank, move the power switch on the GA-1310 to the Off position. GA-1310 O REBOOT OR RESTART THE 1 At the copier, press the Menu button.