Panasonic CF-U1 Series Reference Manual page 52

Disabling/Enabling Wireless Communication
<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>
There are 3 ways of disabling and enabling wireless communication.
The wireless switch is at right next to DC-IN jack.
Wireless Switch Utility (
Settings in the [Advanced] menu of the Setup Utility (
NOTE
For further information about Wireless LAN:
For further information about Bluetooth:
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
The Wireless Switch
1
Open the cover.
Slide the latch down to unlock the cover.
A
Open the cover.
B
To disable all wireless communication
2
Switch (A) to OFF
To enable wireless communication
2
Switch (A) to ON
In the default setting, the wireless switch enables all wireless devices when it is set to ON.
NOTE
If you uninstall the Wireless Switch Utility, set the wireless switch to ON.
Do not turn on/off the switch repeatedly at too short intervals.
page 53)
page 55
page 58
page 62)
52