Copyright This document and parts thereof must not be reproduced or copied without written per- mission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.
(EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual • Press ESC E C indicates that you press and release each key in sequence (to copy a selected object in this case). • The names of push and toggle buttons are boldfaced. For example, click OK.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual The tip icon indicates advice on, for example, how to design your project or how to use a certain function. 1.8. Terminology Term Description Alarm An abnormal state of a condition.
The report control block controls the reporting processes for event data as they occur. The reporting process continues as long as the communication is available. ABB proprietary communication protocol used in substation automation. SPA device Protection and/or Control Product supporting the SPA protocol version 2.5 or earlier.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Introduction 2.1. General information about the COM600 series The COM600 product series are versatile Substation Management Units that help realize smart substation and grid automation solutions in industrial and utility distribution net- works.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual • COM600F is a dedicated distribution automation controller unit that runs dis- tributed grid and feeder applications for ANSI power networks and inherits all core features of the COM600 series.
Page 15
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual SysConf.bmp Figure 2.3-1 System overview The protocol handling, that is, configuration and operation aspects comprise of generic and specific aspects. These generic and specific parts will be described separately in this manual.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual IEC 61850 Proxy server 3.1. ACSI conformance statement 3.1.1. ACSI conformance statement ACSI conformance statements shall be used to provide an overview and details about a device claiming conformance with ACSI: •...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual c1 – shall be ‘M’ if support for LOGICAL-DEVICE model has been declared. O – Optional M – Mandatory 3.1.3. ACSI models conformance statement Table 3.1.3-1 ACSI models conformance statement...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Services Client/Sub- Server/Pub- Value/Comments TP/MC scriber lisher supported TimeStamp resol- (nearest negative ution power of 2 in seconds) c6 – shall declare support for at least one (BRCB or URCB).
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Table 3.3.1-1 PICS for A-Profile support Client Server Value/Comment Client/Server A-Profile SUPPORTED GOOSE/GSE Management SUPPORTED A-Profle GSSE A-Profile TimeSync A-Profile c1 – shall be ‘m’ if support for any service specified for Client/S are declared within the ACSI basic conformance statement.
Page 24
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual All required IEC 61850 services for supporting the ACSI services stated to be supported are supported by the used MMS stack MMS-EASE Light.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual IEC 104 OPC slave 4.1. About this section This section provides reference information about the following issues: • IEC 61850 data modeling • Attributes • Status codes 4.2.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 4.2.3. Double point status (DPS) DPS represents DMCD M_DP_NA_1, M_DP_TA_1, M_DP_TB_1. Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element stVal ENUMERATED...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element dirNeut ENUMERATED unknown VT_I4 forward backward Quality EI, BL, SB, NT, IV VT_I4...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protection inform- OPC data types range ory/Optional ation element REAL VT_R4 REAL VT_R4 unit SiUnit Config VT I4 Description Text VT_BSTR 4.2.10.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 4.2.12. Delta (DEL) DEL represents DMCD M_ME_NA_1, M_ME_TA_1, M_ME_TD_1, M_ME_NB_1, M_ME_TB_1, M_ME_NC_1, M_ME_TC_1, M_ME_TF_1. Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element phsAB.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element ctlSelOn FALSE | TRUE VT_BOOL ctlSelOff FALSE | TRUE VT_BOOL stVal ENUMERATED intermediate-state...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 4.2.17. Binary controlled step position information (BSC) BSC represents DMCD M_ST_NA_1, M_ST_TA_1, M_ST_TB_1, M_RC_NA_1. Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 4.3. Status codes 4.3.1. Introduction The following status codes are defined for the IEC 60870-5-104 slave protocol. Some typical reasons for some of the status codes are also given.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 13857 ICCC_MESSAGE_BUFFER_FULL. Internal software error. The value of the ML attribute may be too small. 13858 ICCC_MESSAGE_FILLING_ERROR. Internal software error. The value of the ML attribute may be too small.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 4.4.2. Client attributes Table 4.4.2-1 Client attributes Property / Para- Value or Value range/ Default Description meter Protocol Stack Ver- Value: Version information The version information of the Protocol sion Stack.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Property / Para- Value or Value range/ Default Description meter Received S format The number of received supervisory mes- messages sages. Received U format The number of received unnumbered messages messages.
Page 37
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Property / Para- Value or Value range/ Default Description meter Detailed Status When written: Indicates the detailed information about the station device status. Setting Detailed 1 = Re-transmit system mes-...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual DNP3 LAN/WAN OPC slave 5.1. About this section This section provides reference information about the following issues: • IEC 61850 data modeling • Attributes • Status codes 5.2.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 5.2.3. Double point status (DPS) Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element stVal ENUMERATED Intermediate-state state (0=OFF, VT_I4 1=ON) off (1)
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 5.2.6. Protection activation information (ACT) ACT phases information is mapped in the same way as SPS stVal. Name Type Value/ Value Mandat- Protocol informa- OPC data types...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 5.2.8. Binary counter reading (BCR) Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element actVal INTEGER Value | Frozen VT_I4 value | Current...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element phsC.cVal.mag AnalogueValue Phase C Current VT_R4 Value phsC.q Quality VT_I4 DNP status phsC.t...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element phsCA.cVal.mag q AnalogueValue Phase CA Current VT_R4 Value phsCA.q Quality VT_I4 DNP status phsCA.t...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element stSeld BOOLEAN FALSE | TRUE State (0=OFF, VT_BOOL 1=ON) 5.2.15. Controllable integer status (INC)
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element TimeStamp <none> | Time of VT_DATE occurrence 5.2.18. Integer controlled step position information (ISC)
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 17655 The Data Flow Control bit of the messages from the master is set for too long. 17656 The slave does not receive a reply from the master.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 5.4. Attributes 5.4.1. General information about attributes In addition to item tags for process data (indications and commands), the OPC servers and clients also provide some item tags for controlling the devices and retrieving status information from them.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 5.4.3. DNP LAN Channel attributes Table 5.4.3-1 DNP LAN Channel attributes Property / Para- Value or Value range/ Default Description meter In Use 0 = Not in use, the channel...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 5.4.4. DNP LAN IED attributes Table 5.4.4-1 DNP LAN IED attributes Property / Para- Value or Value range/ Default Description meter In Use 0 = Out of use...
Page 50
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Property / Para- Value or Value range/ Default Description meter Transmitted Data The number of transmitted data messages. Messages Transmitted Com- The number of transmitted command mand Messages messages.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Modbus TCP slave 6.1. About this section This section provides reference information about the following issues: • IEC 61850 data modeling • Attributes • Status codes. 6.2.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 6.2.3. Double point status (DPS) Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element stVal ENUMERATED Intermediate-state state (0=OFF, VT_I4 1=ON) off (1)
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 6.2.6. Protection activation information (ACT) ACT phases information is mapped in the same way as SPS stVal. Name Type Value/ Value Mandat- Protocol informa- OPC data types...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 6.2.8. Binary counter reading (BCR) Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element actVal INTEGER Value | Frozen VT_I4 value | Current...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 6.2.11. Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element phsA.cVal.mag AnalogueValue Phase A Current VT_R4 Value phsA.q Quality VT_I4 Modbus status phsA.t...
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element phsCA.cVal.mag q AnalogueValue Phase CA Current VT_R4 Value phsCA.q Quality VT_I4 Modbus status phsCA.t...
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element stSeld BOOLEAN FALSE | TRUE State (0=OFF, VT_BOOL 1=ON) 6.2.15. Controllable integer status (INC)
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Name Type Value/ Value Mandat- Protocol informa- OPC data types range ory/Optional tion element TimeStamp <none> | Time of VT_DATE occurrence 6.2.18. Integer controlled step position information (ISC)
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual The server does not automatically update the attributes according to the update rate of the OPC group. Instead, the client must explicitly refresh the group, or request a read of single attributes to retrieve the latest values.
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 6.3.3. Channel attributes Table 6.3.3-1 Modbus TCP Channel attributes Property / Parameter Value or Value range/ Default Description In Use 0 = Not in use, the channel Data type: Integer.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual 6.3.4. IED attributes Table 6.3.4-1 IED attributes Property / Parameter Value or Value range/ Default Description In Use 0 = Out of use Data type: Integer 1 = In use...
Page 62
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Property / Parameter Value or Value range/ Default Description Transmitted Messages The number of transmitted messages. Received Messages The number of received mes- sages.
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Appendix 1 Interoperability list for IEC104 Slave OPC Client Not supported Supported Supported, may need additional engineering This companion standard presents sets of parameters and alternatives from which subsets must be selected to implement particular telecontrol systems.
Page 64
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual The possible selection (blank, X, R, B or A) is specified for each specific clause or parameter. A black check box indicates that the option cannot be selected in this com- panion standard.
Page 66
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Application layer Transmission mode for application data Mode 1 (the least significant octet first), as defined in clause 4.10 of IEC 870-5-4, is used exclusively in this companion standard.
Page 67
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual <6> :=Step position information with time tag M_ST_TA_1 <7> :=Bitstring of 32 bit M_BO_NA_1 <8> :=Bitstring of 32 bit with time tag M_BO_TA_1 <9> :=Measured value, normalized value M_ME_NA_1 <10>...
Page 68
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual <40> :=Packed output circuit information of protection M_EP_TF_1 equipment with time tag CP56Time2a Either the ASDUs of the set <2>, <4>, <6>, <8>, <10>, <12>, <14>, <16>, <17>, <18>, <19>...
Page 69
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual System information in control direction (station-specific parameter) <100> :=Interrogation command C_IC_NA_1 <101> :=Counter interrogation command C_CI_NA_1 <102> :=Read command C_RD_NA_1 <103> :=Clock synchronization command C_CS_NA_1 <104> :=Test command C_TS_NA_1 <105>...
Page 70
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Type identifier and cause of transmission assignments (station-specific parameters) • Shaded boxes are not required • Black boxes are not permitted in this companion standard • Blank = Function or ASDU is not used •...
Page 71
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Basic application functions Station limitations (station-specific parameter) Remote initialization An indication ASDU “Controlling Station Initialized” sent to the Controlled Station is not used.
Page 72
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Cyclic data transmission (station-specific parameter) Cyclic data transmission Read procedure (station-specific parameter) Read procedure Spontaneous transmission (station-specific parameter) Spontaneous transmission Double transmission of information objects with cause of...
Page 73
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual group 3 group 9 group 15 group 4 group 10 group 16 group 5 group 11 group 6 group 12 Information Object Addresses assigned to each group must be defined.
Page 74
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Mode B: Local freeze with counter interrogation Mode C: Freeze and transmit by counter interrogation commands Mode D: Freeze by counter interrogation command, frozen values reported spontaneously...
Page 75
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Transmission of disturbance data of protection equipment Transmission of sequences of events Transmission of sequences of recorded analogue values File transfer in control direction Transparent file Background scan (station-specific parameter)
Page 76
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Maximum number of outstanding I format APDUs (k) and the latest acknowledgment (w) Parameter Default value Remarks Selected value 12 APDU Maximum difference 1-32767 s receive sequence...
Table A2-1 Device profile describing the implementation of DNP V3.00 slave pro- tocol in COM600 SUBSET 2: the default subset DNP V3.00DEVICE PROFILE DOCUMENT Vendor Name: ABB Oy Substation Automation Products Device Name: COM600 Highest DNP Level Supported: For Requests: Subset Level 2...
Page 78
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Requires Data Link Layer Confirmation: [x] Configurable Timeouts while waiting for: Data Link Confirm [ ] None [ ] Fixed at _________ [ ] Variable [x] Configurable Complete Appl.
Page 79
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Sends/Executes Control Operations: Latch Off [ ] Never [x] Always [ ] Sometimes [ ] Configurable Queue [x] Never [ ] Always [ ] Sometimes [ ] Configurable...
Page 80
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Table A2-2 Supported function codes CODE FUNCTION DESCRIPTION Supported Transfer Function Codes Confirm Message fragment confirmation No response Read Request objects from outstation Respond with requested objects...
Page 81
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual CODE FUNCTION DESCRIPTION Supported Freeze with time Copy the specified objects to freeze buffer at specified time Respond with status of operation Freeze with time Copy the specified objects to...
Page 82
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual CODE FUNCTION DESCRIPTION Supported Delay Measure- Perform propagation delay meas- ment urement Record current Used in a network application to time allow the Master station and the...
Page 83
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) Control Block - All Variations Control Relay...
Page 84
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 32-Bit Frozen Counter with Time of Freeze...
Page 85
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 16-Bit Delta Counter Change Event without Time...
Page 86
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 16-Bit Frozen Delta Counter Event with Time...
Page 87
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 32-Bit Analog 129,130 17,28 Change Event without Time...
Page 88
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) Time and Date - All Variations Time and Date...
Page 89
Table A2-4 Device profile describing the implementation of DNP V3 slave protocol in COM600 SUBSET 3: the used subset is selected using the IED's subset property DNP V3.00DEVICE PROFILE DOCUMENT Vendor Name: ABB Oy Substation Automation Products Device Name: COM600 Highest DNP Level Supported:...
Page 90
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual DNP V3.00DEVICE PROFILE DOCUMENT Maximum Data Link Re-tries: Maximum Application Layer Re-tries: [ ] None [ ] None [ ] Fixed at _______________________ [x] Configurable, range 0 to 10...
Page 91
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Timeouts while waiting for: Sends/Executes Control Operations: WRITE Binary Outputs [x] Never [ ] Always [ ] Configurable [ ] Sometimes SELECT/OPERATE [ ] Never [x] Always...
Page 92
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual Timeouts while waiting for: [x] Never [ ] Always [ ] Configurable [ ] Sometimes FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY: Reports Binary Input Change Events when no specific...
Page 93
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual CODE FUNCTION DESCRIPTION Supported Read Request objects from outstation Respond with requested objects Write Store the specified objects to out- station. Respond with status of operation Control Function Codes...
Page 94
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual CODE FUNCTION DESCRIPTION Supported Application Control Function Codes Cold Restart Perform desired reset sequence Respond with a time object Warm Restart Perform desired partial reset oper- ation...
Page 95
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual CODE FUNCTION DESCRIPTION Supported Confirm Message fragment confirmation Response Response to requested message Unsolicited Mes- Spontaneous message without sage request Supported objects Table A2-6 Supported objects OBJECT...
Page 96
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) Binary Counter - 1, 7, 8, 9, 10, 22...
Page 97
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 32-Bit Frozen Delta Counter with Time of...
Page 98
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 16-Bit Counter Change Event with Time 32-Bit Delta...
Page 99
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 16-Bit Analog 00,01,06 129, 130 00, 01...
Page 100
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) 16-Bit Analog Change Event with Time Frozen Analog...
Page 101
1MRS758692 COM600 series 5.0 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) Unsynchronized 129, 130 quantity=1 Time and Date...
Page 102
COM600 series 5.0 1MRS758692 Slave Protocols (Ethernet) and Applications Technical Refer- ence Manual OBJECT Description REQUEST Qual RESPONSE Qual Codes (slave must Codes(hex) (master must (hex) parse) parse) Func Codes Func Codes (dec) Small Packed Binary-Coded Decimal Medium Packed Binary-Coded...