10. Defect Specifications
10.1. Inspection Conditions
-
Room temperature is 25_C ± 5_C
-
Inspect at 20 cm from display
-
Viewing angle and Illumination:
-
Display specifications:
--30 ≤ °x ≤ +30, 0 ≤ ∞y ≤ +20
60 lux at a LCD surface
-
Appearance specifications:
--45 ≤ °x ≤ +45, --45 ≤ ∞y ≤ +45
700 lux at a operation table
10.2. Display Specifications
Item
Line Defect
Dot Defect
(Luminous dots)
Dot Defects
(
(Dark dots)
)
Dot Defect total
Not allowed
Lumious dots are measured while the screen is black.
R+G+B
G
Neighboring
Same color ≤ 6.5 mm
Different color ≤ 6.5 mm All allowed
Between neighboring
≤ 10 mm
Linkage
Linked two dots
(same color)
Linked two dots
(different color)
Linked three or more dots
(same color)
Linked three or more dots
(different color)
Dark dots are measured while the screen is illuminated with Red, Green
or Blue.
R, G, B
R+B+G
Neighboring
Same color ≤ 6.5 mm
Different color ≤ 6.5 mm
Between neighboring
≤ 10 mm
Linkage
Linked two dots
(same screen)
Linked two dots
(different screen)
Linked three or more dots
(same screen)
Linked three or more dots
(different screen)
Full luminous dots + Half luminous dots + Dark dots ≤ 15 dots
456A
Specifications
≤ 15 dots
≤ 6 dots
R,G,B ≤ 2 pairs each
≤ 0
R;B;G ≤ 3 pairs each
All allowed
≤ 0
≤ 0
≤ 7
≤ 15
All allowed
All allowed
All allowed
Linked two dots are
counted as one dot.
All allowed
R, G, B ≤ 0
R, G, B ≤ 0
25