Room Analytics - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Room analytics

The room analytics feature use several
variables from the conference room
and re-uses them to analyze the room
utilization over time or per call.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals
People presence detection
The video system has the capability to find whether or not people
are present in the room. It takes a minimum of two minutes to
detect whether people are present or not in the room. After the
room becomes vacant, it may take up to two minutes for the
status to change.
This feature is based on ultrasound. It will not keep record of who
was in the room, only whether or not there are people present in
the room.
You can turn on/off the people presence detection from the web
interface. Sign in to the web interface, and navigate to
Configuration > RoomAnalytics > PeoplePresenceDetector.
Status
You may see the status at a given moment of people's presence.
Sign in to the web interface, and navigate to
RoomAnalytics.
Maintenance
Setup >
Setup > Status >
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
165
Administrator Guide
System settings Appendices Appendices