Status Display During Adjustment; Operation Of Return To Tuner Test Mode; Band Switch List; Cd Test Mode Specification - Kenwood KDC-202U Service Manual

3. Status display during adjustment

Status
Adjustment success
Adjustment failure

4. Operation of return to TUNER Test Mode

Operation
RETURN Mode release

BAND switch list

Type BAND1
K (1)FM1
E/M (1)FM1
M (1)FM1

CD Test Mode Specification

It shall be the same as normal RST start in other than the below setting.
Playback track from top
Default for Display mode
Operations in CDDA playback
Operation
Special track up
Special track down
HC1/2 Judgement
1
Information Display
(Toggle)
Normal Display
Special jump
3
operation
Special jump
4
operation
Special jump
5
operation
Special jump
6
operation
Display content
A D J O
A D J N
Display content
BAND2 BAND3
FM2 FM3
FM2 FM3
FM2 FM3
Content
Display content
# # #
# # #
# # #
T – 0 1
(No.WA002<Rev.001>)15/20
When the adjustment value write-in to E2PROM
(IC771 on X34) has been completed.
K : x x
xx: Level offset value (HEX)
When the adjustment value write-in to E2PROM
G (IC771 on X34) has failed
Return to TUNER Test Mode
BAND4 BAND5
(2)AM -
(2)MW/LW -
(2)MW (3)SW1
No.9
Play time
Pressed Track up depend on different cases.
Case 1: Track>8 No.9 → No.15 → No.10 → No.22
→ No.12 → No.13 → No.14 → No.9
Case 2: Track<8 No.1 → No.2 → No.3 → Until Last
Track
One-by-one Track down by sequence follow Track
No.
CDDA/ MP3/ WMA/ AAC Judgement Information
### as CD: CDDA track playback
### as MP3: MP3 file playback
### as WMA: WMA file playback
H C 1
### as AAC: AAC file playback
H C 2
HC1/2 Judgement Information.
HC1: HC1 mecha (for this model)
HC2: HC2 mecha
∗ ∗ ∗: Impossible of Judgement
Normal Display
1 : 2 3
Jump to No.28
(Scratch 0.7mm for MUSIC line vibration test)
Jump to No.14 (Damaged disc TCD-731RA Tr14)
Jump to No.15
Set Volume value at 27 (for error operation FCT
check of 20Hz 0dB DC protection)
Jump to No.9 if the other than track No.9 is playing.
Jump to No.22 if the track No.9 is playing.
Details
Details
BAND6 Details
- (1)→(2)→(1)...
- (1)→(2)→(1)...
(4)SW2 (1)→(2)→(3)→(4)→(1)...
Details
Details