5 Mounting and Installation
5.1 Protective Sheet Installation
Mounting and Installation
For public disclosure
This chapter provides the following procedures to mount and install the QuickPanel
Operator Interface:
•
Protective Sheet Installation
•
Mounting Location
•
Panel Mounting
•
VESA Arm Mounting
•
Battery Installation and Replacement
•
Connectors
➢ ➢ To install the protective sheet
1.
Remove the protective film from the QuickPanel
2.
Wipe the display unit of any dust or fingerprints.
3.
Peel back a corner of the clear side of the protective sheet.
4.
Begin applying the corner to the display screen.
Slowly apply the rest of the protective sheet, smoothing out as you go.
5.
6.
Peel the green curing film from the protective sheet.
+
display screen.
GFK-2847R 61
+