5 megapixel day & night outdoor dome network camera (86 pages)
Summary of Contents for D-Link DCS-6314
Page 1
Quick Install Guide Full HD Outdoor Fixed Dome Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera. DCS-6314 Version 1.0 April 25, 2013...
This installation guide provides basic instructions for installing the DCS-6314 Network Camera on your network. For additional information about how to use the camera, please see the User Manual which is available on the CD included in this package or from the D-Link support website. Installation Steps 1.
Lift the dome off the base of the camera. Install the microSD Card Push the microSD card into the camera with the gold contacts oriented towards the base of the camera. To eject, push the microSD card into the slot. D-Link DCS-6314 Quick Install Guide...
Pendant Mount (DCS-34-2) Height: 201mm (7.9 inches) Diameter: 150mm (5.9 inches) Weight: 665g (1.45lbs) Rubber Seal Bracket Pendant Bracket Mounting Plate Figure 3.1 Bracket Cap Figure 3.2 Figure 3.4 Figure 3.3 D-Link DCS-6314 Quick Install Guide...
Page 7
Wall Mount (DCS-34-3) Height: 253mm (9.96 inches) Diameter: 150mm (5.9 inches) Weight: 770g (1.7lbs) Bracket Wall Mount Mounting Plate Figure 4.1 Bracket Cap Figure 4.2 Wall Mount Dome Camera Figure 4.3 Figure 4.4 D-Link DCS-6314 Quick Install Guide...
Page 8
Connection with a PoE Switch If you are using a PoE switch, connect the IP camera to the switch via an Ethernet cable, which will provide transmission of both power and data over a single cable. D-Link DCS-6314 Quick Install Guide...
5. Setup Wizard Insert the DCS-6314 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.
Page 10
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed.
Viewing Camera via Web Browser Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration.