Table of Contents
Advertisement
▣ Example of incorrect installation
※ Below shows the example of incorrect application/usage. Be careful with installation and usage
in the following cases as it can cause electric shock, injury, burn etc.
No.
1
When using with impact, such as product falling, applied on product
2
When using with switchboard below rated current capacity
3
When product is disassembled and reconfigured arbitrarily
4
When installing/using product without securing space to cool the product
5
When fixed/used loosely without considering the installation board, product weight/vibration etc.
6
When installing, repairing and checking the product in an environment where water can penetrate into the
product. This product can be used for underwater lighting (Underwater scenery, exploration, event usage etc.)
7
When using the PLS product without repairing after submersed under water
8
When using the product in condition with excessive power voltage variance (Above ±15%)
9
When using the product without grounding
10
When excessively bend the power cord or using damaged power cord
11
When inserting any pin, coin or metal wire into the internal/external hole on the case
12
When putting a cover on the exterior of the product for use without considering the suction inlet/exhaust outlet
13
When using the product with flammable material around the product
14
When disassembling while the product is operating
15
When repairing or disassembling the product by an unqualified technician
16
When using in environment where alien particles penetrate into the suction inlet/exhaust outlet
17
When cleaning or repairing the product while operating the product
18
When touching the power cord with wet hands
19
When using the product for purpose other than lighting (Heating food, drying clothe, heating etc.)
20
When moving the product by holding the part other than the main unit (Moving by holding the reflector etc.)
21
When moving the part without caution not considering the weight of the product
22
When not wearing any safety gear when contacting the hot part (Cover glass, reflector etc.)
23
When using the product near a heating device
24
When installing and using the product near areas with risk of flooding
25
When cutting and using the power cord arbitrarily
26
When making body contact on the product when it is hot while operating or immediately after operating
27
When installing and using the product in areas not properly ventilated
28
When using underwater
Example of incorrect application and usage
11
Expected risk
Fire/Electric shock
Fire/Electric shock
Fire/Electric shock
Fire
Injury
Electric shock
Fire/Electric shock
Fire/Electric shock
Electric shock
Fire/Electric shock
Fire/Electric shock
Fire
Fire/Electric shock
Fire/Electric shock
Fire/Electric shock
Fire
Electric shock
Electric shock
Fire/Electric shock
Injury
Injury
Injury
Fire/Explosion
Electric shock
Fire/Electric shock
Injury
Fire
Electric shock
Advertisement
Table of Contents
