Operating Features - Kenwood TK-8162 Service Manual

TK-8160/8162
1. Controls and Functions
1-1. Front Panel
q w
y u
1-2. Microphone
!0
q
(Power) switch
Press to switch the transceiver ON or OFF.
w
/ keys
Press to activate their programmable functions (page 5).
e Display
Refer to right or next page.
r
/ keys
Press to activate their programmable functions (page 5).
t Speaker
Internal speaker.
y Microphone jack
Insert the microphone plug into this jack.
u TX/RX Indicator
Lights red while transmitting. Lights green while receiv-
ing a signal.
i , ,
, and keys
Press to activate their programmable functions (page 5).
o
key
Press to activate its programmable function (page 5).
!0 PTT switch
Press this switch, then speak into the microphone to call a
station.
4

OPERATING FEATURES

e r t
i o
1-3. Display (TK-8160)
Indicator
Appears when the key programmed as
Monitor or Squelch Off is pressed.
Appears when the DTMF code of a call
matches the code in your transceiver.
Appears while using the Talk Around
function.
The selected zone is added to the
scanning sequence.
Appears while scanning.
Appears when a message is stored in the
transceiver stack memory. Appears and
blinks when a new message has arrived.
Appears when the AUX port has been
activated.
The selected channel is set as a Priority
channel.
Appears when the Horn Alert function
has been activated.
The selected channel is added to the
scanning sequence.
Appears when Scrambler function has
been selected.
This icon is not used on this transceiver.
Displays the currently selected zone and
channel number, or the channel name.
Description