Bosch C 60 Manual page 74

C 60 Analog and Frequency Inputs
Configuring Inputs – Generic Linear Sensor
Configuring a generic linear sensor

Example: Acceleration sensor 5g

From sensor data sheet – operating characteristics

Sensitivity 400mV/g Offset 2500mV

The sensor has a linear output signal with sensitivity and offset

Drag the 'Sensitivity/Offset' analog signal source from the Toolbox and drop it on the

desired analog input channel in the C 60 project tree
A 'Sensitivity/Offset Wizard' opens

Motorsport
74
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.