5. Torque the steering wheel nut to 50 ft-lb. (37 N 6. Snap the logo cover into place (Fig. 1). 2001 by The Toro Company 8111 Lyndale Avenue South All Rights Reserved Bloomington, MN 55420-1196...
Attaching the Trailer Hitch 1. Line up the holes in the trailer hitch with the holes in the tractor frame. 2. Attach the hitch with two bolts, washers, and nuts (Fig. 3). 2307 Figure 1 1. Center spoke 4. Nut 2.
11. Insert the dumping lever through the hole of the cover and secure it with the M5 x 12 screw and M5 nut (inside the tube) (Fig. 4). 12. Install the grass collector to the tractor (refer to the Operator’s Manual, Installing the Grass Collector). When the grass collector is properly positioned, place the triangle symbol decal directly opposite the triangle symbol on the rear of the tractor.
5. Install the battery in the chassis; refer to the Operator’s Manual, Installing the Battery. Filling the Fuel Tank Add fuel to the fuel tank; refer to Filling the Fuel Tank in the Operator’s Manual. Checking the Tire Pressure Check front and rear tires for proper inflation; refer to the Operator’s Manual, Tire Pressure for recommended inflation pressure.