2.2.20. SNS2 PC Board (1010)
(3)
(2)
(5)
(4)
(6)
2.2.21. Printer Grease Points
(1) Place the machine on its rear side.
(2) Remove 1 Screw (19).
(3) Remove the Plate A (507).
(4) Remove 1 Screw (19).
(5) Disconnect Connector CN82 (538) on the SNS2 PC
(6) Remove the SNS2 PC Board (1010).
Before reassembling, apply EM-50L Grease to the parts
shown in the illustration.
(3)
(1) B83D22 Gear G (622) : Gear surface
(2) D60D20 Gear B (621) : Rib surface
(3) D55 Gear F (619) : Gear surface
(4) D55 Gear F (619) : Gear Side surface
(2)
(4)
(1)
Board (1010).
50