1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
Page 6
3.2. Trial Operation (after checking Troubleshooting Guide) 3.2.1. Assembly • Confirm if there is no gap between housing A and B by pinching lead wires. • There is no dust or deformation on battery terminals. 3.2.2. Operation • Confirm the forward and reverse side of rotation. •...
4 Disassembly and Assembly Instructions NOTE:Be sure to start disassembly after removing the blade and the battery pack. 4.1. Disassembly Instructions 4.1.1. Remove the baseplate, plug and clamping piece.
4.1.6. Remove the connector of switch assembly from the main PCB. 4.2. Assembly Instructions 4.2.1. Insert the connector of the switch assembly into the main PCB.
7 Exploded View and Replacement Parts List Model No. : EY45A1 Exploded View...
Page 15
Model No. : EY45A1 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks WEY45A1H3078 HOUSING AB SET 1 Only for U.K. and Europe WEY45A1H3079 HOUSING AB SET 1 Only for Australia WEY45A1K4728 BASEPLATE ASSEMBLY WEY45A1K0398 PLUG WEY45A1K0208...