T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Model BTD133 Cordless Impact Driver is an advanced version of
Model BTD132, featuring the same BLDC motor (BrushLess DC
motor) and electronic 3-stage impact power settings with variable
power control in each range as BTD132, plus redesigned belt clip
for more convenience and improved switch and electronic controller
for higher durability.
For differentiation from BTD132, equipped with transparent hammer
case cover and three stripes printed next to the "BL motor" logo.
This product is powered by 14.4V/ 3.0Ah Li-ion batteries BL1430/
BL1430A*.
*Not compatible with 14.4V/1.3Ah Li-ion battery BL1415
This product is available in the following variations.
Model No.
BTD133Z
---
BTD133RFE
BL1430
(Li-ion 3.0Ah)
---
S
pecification
Voltage: V
Capacity: Ah
Battery
Cell
Charging time (approx.): min.
Max output (W)
Driving shank
Machine screw
Standard bolt
Capacities
High tensile bolt
Coarse thread screw
Impacts per min.: min.-
No load speed: min.-
Max. fastening torque
Electric brake
Speed selection (Impact power selection)
Variable speed control by trigger
Reverse switch
LED job light
Weight according to
EPTA-Procedure 01/2003
*4 Catalog value (torque at 3 seconds after seating, when fastening M14 high tensile bolt)
*5 with Battery BL1430
S
tandard equipment
See the model variation list above.
Note: The standard equipment for the tool shown above may differ by country.
O
ptional accessories
Shoulder belt
Drill chucks
Stopper set (w/o Bit)
Stopper set (w/ Bits)
Battery protector
BTD133
Cordless Impact Driver
Battery
Battery
cover
type
quantity
No
No
No
2
1
=ipm
1
=rpm
1
: N.m (kgf.cm/ in.lbs)
*4
: kg (lbs)
*5
Hook set (Belt clip)
Bit piece
Phillips bits
Socket bits
Connecting bit 6.35-48
Dimensions: mm (")
Length (L)
Width (W)
Height (H)
*2: with One-touch bit holder
*3: with Standard bit holder
Plastic
Belt
Charger
carrying case
clip
No
No
Yes
DC18RA
Yes
14.4V
Li-ion
22 with DC18RA
60 with DC18SD, DC18SE
6.35mm (1/4") Hex
M4 - M8 (5/32 - 5/16")
M5 - M14 (3/16 - 9/16")
M5 - M12 (3/16 - 1/2")
22 - 125mm (7/8 - 4-7/8")
0 - 3,200/ 2,600/ 1,100
0 - 2,400/ 1,800/ 1,100
160 (1,630/ 1,420)
Electronic 3 stage
1.4 (3.1)
Tool holder
Li-ion battery 1430
Li-ion battery 1430A
Fast charger DC18RA
139 (5-1/2)
*2
W
140 (5-1/2)
*3
79 (3-1/8)
236 (9-1/4)
Housing
Offered to
color
All countries except
the four described below
USA, Canada, Mexico, Panama
Makita-blue
All countries except
the four described below
USA, Canada, Mexico, Panama
3.0
210
Yes
Yes
Yes
Yes
Charger DC18SD
Charger DC24SC
Automotive charger DC18SE
Automatic refreshing adapter ADP03
OFFICIAL USE
for ASC & Sales Shop
PRODUCT
P 1/ 10
L
H