Calc'nclean Perfect; Cleaning The Boiler - Bosch SENSIXX DS38 Operating Instructions Manual

11. Calc'nClean Perfect

Automatic clean warning
The "Calc" automatic clean warning indicator
light (4) will flash indicating that boiler and
iron steam chamber must be rinsed.
Leave the appliance unplugged for more
than two hours, check carefully that the
appliance is cold and that the water tank (1)
is empty.
Please proceed as follows:

11.1 Cleaning the Boiler

Do not use descaling agents for rinsing out
the boiler, as they could damage it.
1 Fix the iron to the stand by inserting the
tip of the iron into the front slot and
moving the lock system (3) against the
heel of the iron. Place your appliance on
the edge of your kitchen sink.
ºC
2 Unscrew the scale collector (12) and
take it out.
1
12
B O SC H
~ 2 h.
2
3 To wash the scale collector, you may:
a) Place the scale collector under the
water tap and wash it up until calc
residues are removed. Squeeze it as
indicated in the picture.
b) Immerse the scale collector in tap
water (250 ml) mixed with a measure
(25 ml) of descaling fluid.
a)
The descaling fluid can be obtained
from our Aftersales Service or Specialist
outlets:
Accessory code
(After-sales)
311144
4 Holding your steam generator in upside
down position, and using a jug, fill the
boiler (in the base unit) with 1/4 litre of
water.
0,25 L.
b)
25 ml
250 ml
Name of accessory
(Specialist outlets)
TDZ1101
* Model dependent