1.3 Telephone Features and Operation
•
Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
•
Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer to
"1.3.13 Call Waiting Tone").
•
A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (→ 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension)
•
For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".
1.3.77 Wireless XDP Parallel Mode
Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
PS
PS
Press TALK.
To cancel
PS
PS
Press TALK.
•
Some wired telephones are prohibited from using this feature.
•
If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
142
Operating Manual
4
8
1
Enter
48.
Enter 1.
4
8
0
Enter 0.
Enter
48.
extension no.
C.Tone
Enter extension number
of the paired telephone.
C.Tone
Press CANCEL.
Press CANCEL.