3.1 Customising Your Phone (Personal Programming)
3.1.2
Settings on the Programming Mode
You can programme features using the programming mode.
— Setting Features
— Clearing Features
•
To exit at any time, lift the handset.
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes
below to indicate your customised setting.
Notice
The default value may vary depending on country/area. For more details, consult your dealer.
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Item
Your extension information
Preferred display contrast
level from the 4 levels
available.
(Display Contrast
1
Selection)*
152
User Manual
To programme
programming
OR
input
AUTO DIAL
STORE
Follow
Press ENTER
programming
or STORE.
input.
Programming
Input
PT: The display shows the PBX number, slot number
and port number.
<example>
0
0
PS: The display shows the PS number.
<example>
0
1
selection &
parameter
AUTO DIAL
STORE
Follow Selection
Press ENTER
& Parameter.
or STORE.
Selection & Parameter
EXT1050:10308
PBX no.
Port no.
Slot no.
EXT3001:99001
PS no.
1
Light
2
Little Light
3
Little Dark
4
Dark
To exit
PROGRAM
OR
OR
PAUSE
Press PROGRAM
or PAUSE.