Dialing By Simply Going Off-Hook (Pickup Dialing) - Panasonic KX-TA308 Operating Instructions Manual

1.3 Making Calls

Dialing by Simply Going Off-Hook (Pickup Dialing)

Allows you to make an outgoing call by just going off-hook (single line telephone only).
Storing a phone number
SLT
Lift the handset or press
SP-PHONE/MONITOR.
• You must dial a line access code (9, 0 or 81 through 86) as the
first digit when storing an external party phone number.
Setting / Canceling
SLT
Lift the handset or press
SP-PHONE/MONITOR.
Dialing
SLT
Lift the handset or press
SP-PHONE/MONITOR.
! • This feature will not work if you answer an incoming call or retrieve a call on hold.
!
• Up to 32 digits, consisting of "0 through 9" and " ", can be stored. The " " button is used
as a PAUSE. However, in the account code verify-all, verify-toll and forced modes, " " is
not regarded as a pause.
• An account code must be stored by pressing "
line access code.
• During the waiting time after going off-hook, you can call another party and override this
feature. You can change the waiting time between going off-hook and connecting with a
called line by System Programming.
• A rotary telephone cannot use this feature.
• See the Installation Manual, Section 3, "Pickup Dialing".
1-26
Operations
7 4 2 phone no.
Dial 742.
Enter the phone number.
#
7 4 1
#
7 4 0
To set: Dial 741#.
To cancel: Dial 740#.
Wait for an answer.
#
Confirmation
Dial #.
tone and
dial tone
To set.
To cancel.
Confirmation tone
and dial tone
Talk.
" and entering the account code after the
Hang up or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.