Recorder Control; Playback; Manual Recording; Multiscreen Display - Panasonic WJ-SX650 Operating Instructions Manual

RECORDER CONTROL

• The following is the procedure examples for recorder
control. Refer to p.
for other recorder control procedures not described
here.
• The following procedures are available when a recorder
is selected.

■ Playback

In the following example, you will play back the recorded
image of Camera 3.
1. Check that Camera 3 has been selected.
WV-CU950/650
2. Press the PLAY/PAUSE*
recorder connected to Camera 3 will be activated, and
recorded image of Camera 3 will be played back.
1
* WV-CU950/650
2
* WV-CU360C/CJ
WV-CU950/650

■ Manual Recording

● WV-CU950/650
Press the REC button.
The recorder will be activated, and recording will be start-
ed.
● WV-CU360C/CJ
1. Select a recorder. (Refer to p.
2. Press the REC button.
The recorder will be selected, and recording will be
started.
● Note
Recording follows the manual recording setting of recorder.
60
36 Lists of Functions and Operations
WV-CU360C/360CJ
1 2
(or PLAY* ) button. The
WV-CU360C/360CJ
25 Recorder Selection.)

■ Multiscreen Display

● WV-CU950/650
Press the MULTI SCREEN button.
The recorder will be selected, and images will be displayed
in multiscreen segments on the selected monitor.
● WV-CU360C/CJ
Press the MULTI SCREEN SEL button while holding down
the SHIFT button.
The recorder will be selected, and images will be displayed
in multiscreen segments on the selected monitor.
● Note
You cannot specify multiscreen segment patterns.

■ Search Playback

1
Press the SEARCH* (or INDEX*
The recorder will be selected, and a search list (time-and-
date entry form, recording event search list, VMD search
list, or marking search list) will be displayed on the selected
monitor.
1
* WV-CU950/650
2
* WV-CU360C/CJ
Notes:
• Depending on selected recorder disks, the search list
display may differ.
• In a search list, you can select a recorded image to
play back. Refer to the operating instructions of
recorder for operating procedures.
■ Playing the Latest Recorded
Image
● WV-CU950/650
Press the GO TO LAST button.
The recorder will be selected, and the latest recorded
image of selected camera will be played back.
Notes:
• Depending on statuses, recorder control may not be
performed properly. In this case, check the recorder
status, and retry the control.
When you use WJ-HD300 Series, start playback before
pressing the GO TO LAST button.
2
) button.