Working with the Tablet PC
Removing a SIM card
1
2
3
Wireless LAN/Bluetooth/4G/LTE/NFC wireless
components
The installation of wireless components not approved by Fujitsu will
invalidate the certifications issued for this device.
Switching the wireless components on and off
The wireless components are switched on and off using the appropriate
functions of the operating system.
► To switch wireless components on and off individually, select Settings – Change
PC settings – Network – Airplane mode.
Configuring WLAN access
•
Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For WLAN specifications, see chapter
42
4
"WLAN specifications", Page
► Open the slot cover (1).
► Remove the SIM card carrier from
its location (2).
► Remove the SIM card from the SIM
card carrier (3).
► Push the SIM card carrier back into
its location (4).
► Close the slot cover.
84.
Fujitsu