BleedThrough Prevention
Thin sheets of original can be copied without bleeding through.
The setting of BleedThrough Prevention becomes invalid if "Photo" is selected in "Original Type".
When setting the Tint adjustment to More Blue or More Red, the copies may come out with bleed through
contamination.
1
Select "BleedThrough Prevention".
To display this screen, refer to step 1 of
Background Removal (see page 27).
If "TracingPaper" is selected in "Original
Type", BleedThrough Prevention of each
image quality type is set to 3.
2
Adjust the level of BleedThrough
Prevention with "-" and "+", and then
select "OK".
28
If you set the Background Removal to "Off",
the BleedThrough Prevention will not be
adjustable.
BleedThrough
There are 6 levels. The
Prevention
higher the level, the higher
the prevention effect.
3
Select "OK".
For the following procedure, refer to steps 6
to 8 of Quality Adjusting (see page 26).