Dvd - Panasonic DIGA DMR-E75V Operating Instructions Manual

Panasonic dvd video recorder operating instructions
Hide thumbs Also See for DIGA DMR-E75V:
Table of Contents

Advertisement

Helpful Hints

∫ DVD

DVD Picture
Status messages do not
appear.
The grey background does not
appear.
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
There is a lot of after-image
when playing video.
There is no apparent change in
picture quality when adjusted
with the Picture menu in the on-
screen menus.
DVD Sound
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio
type.
Cannot switch audio.
DVD Play
Play fails to start even when [1]
is pressed.
Play starts but then stops
immediately.
DVD-Video is not played.
Alternative soundtrack and
subtitles cannot be selected.
No subtitles.
Angle cannot be changed.
You have forgotten your ratings
password.
Quick View does not work.
The resume play function does
not work.
The Video CD picture does not
display properly.
Time Slip does not work.
≥Go to "Display" in the SETUP menus and select "Automatic" in "On-Screen Messages".
Press [STATUS] to show the on-screen messages constantly.
≥Go to "Display" in the SETUP menus and select "On" for "Grey Background".
≥Use the TV to change the aspect. If your TV does not have that function, set "Progressive" in
the "Picture" menu to "OFF".
≥Check the settings for "TV Aspect" in the "Connection" menu.
≥Set "Playback NR" in the "Picture" menu to "OFF".
≥The effect is less perceivable with some types of video.
≥Check the connections and settings. Check the input mode on the amplifier if you have
connected one.
≥Press [AUDIO] to select the audio.
≥Turn V.S.S. OFF.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing bilingual broadcast programmes.
≥You cannot change the audio type when a DVD-R is in the disc tray.
≥You have used digital connection. Set "Dolby Digital" to "PCM" or connect to other equipment
using audio cables (analog connection).
≥There are discs which audio cannot be changed because of how the disc was created.
≥You cannot change the audio type when you select the TP channel.
≥Insert the disc correctly with the label facing up.
≥You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit.
≥When recording to DVD-RAM using EP (8Hour) mode, play may not be possible on DVD
players that are compatible with DVD-RAM. In this case use EP (6Hour) mode.
≥Some DVD-Video cannot be played when you change the ratings level.
≥The languages are not recorded on the disc.
≥You may have to use the disc's menus to select languages.
≥Subtitles are not recorded on the disc.
≥Turn the Subtitles "ON".
≥Angles can only be changed during scenes where different angles are recorded.
≥While the disc tray is open, keep pressing [:/6] and [5/9] on the DVD main unit at
the same time for 5 or more seconds.
≥This does not work if the setting is "Off" in "PLAY a 1.3 & Audio during Search".
≥This does not work when audio is other than Dolby Digital.
≥This does not work when recording is in XP or FR mode.
≥This function only works when the indicator on the right appears in the
unit display.
≥Memorized positions are cancelled when the unit is turned off or when
the tray is opened. The memorized position on the play list is also
cancelled when the play list and title are edited.
≥When connecting to Multi-system TV, select "NTSC" in "TV System" in the SETUP menu.
≥When connecting to PAL TV, the lower part of the picture cannot be displayed correctly during
search.
≥Time Slip does not work when the unit's "TV System" settings are different from the title
recorded on the disc.
DVD
VHS
Page
Page
9, 12,
20, 24,
12, 44
Page
45
45
41
45
41
44
57
41
59
17
15
43
43
40
44
45
45
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents