Page 1
Description 24V Cordless Impact Wrench ONCEPTION AND MAIN APPLICATIONS Model BTW201 can compete with the existing 360W class AC tool, Mod.6904VH in max. fastening torque. And its BPM. Pre-selection System prevents the over-tightening. The variations of this model are as listed below.
Page 2
And the over tightening can be avoided with BPM. pre-selection system. Consequently, Mod.BTW201 is suitable for fastening work in the section where the fastening torque is directed in advance. Bottom view of grip end (View from terminal side) BPM.
Page 3
Fig.A If you want more than 200 BPM., align the both pre-setting dials with 9 as illustrated in Fig. C. In this case, Mod.BTW201 is used as an normal cordless impact driver with 0 - 3,000 bpm. Fig.C The second digit...
Page 4
P 4 / 9 eatures and benefits Indications and functions Special purpose Mode of reverse switch Dial pre-selection Purpose Clockwise rotation Anti-clockwise rotation The second The first digit digit If the dial of second digit is set on "A", the machine does not start in spite of pulling trigger switch, or setting the dial of first digit on any numbers.
Page 5
300 (bpm.) (bpm.) (Dial pre- 99 (Dial pre- selection) selection) omparison of products Model No. MAKITA Specifications BTW201 BTW200 DC 24 DC 24 Voltage ( V ) Battery Capacity (Ah) 1.7 / 3.0 1.7 / 3.0 Energy (Wh) 40.8 / 72.0 40.8 / 72.0...
Page 6
P 6 / 9 epair <1> Disassembling housing R and L Take off bumper from housing with hand. Hex socket Dismount hammer case from housing by taking off head bolts M5x35 4 hex socket head bolts M5x35, and disassemble Housing R housing R and L as illustrated in Fig.
Page 7
P 7 / 9 epair (2)Adjust the opening for steel ball inserting, to the cam groove top of spindle as illustrated in Fig. 5. (3)Take off 2 pcs. of steel balls 5.6 with magnetic bar or tweezers from spindle. Spindle Cam groove top of spindle (4)Loosen the handle of 1R045 turning it anti-clockwise...
Page 8
P 8 / 9 epair < 4 > Removing ball bearing 6002LLB This ball bearing can be removed by pressing with arbor press. Round bar for arbor Internal gear case Ball bearing 6002LLB Fig. 7 < 5 > Fastening torque for tapping screws and bolts The bolts and screws have to be fastened with the directed fastening torque as illustrated in Fig.
Page 9
P 9 / 9 ircuit diagram Switch Terminal Motor black black black Orange Orange Controller black iring diagram Connecting brush holder lead wire (black) with switch Connecting brush holder lead wire (black) with switch Connecting brush holder lead wire (black) with switch Connector Thermoplastic tube Bent the lead wire, and...