Enabling Nat - LG LDK24 ADSL Router User Manual

b. Click on Change State. The page is refreshed and Security is enabled.

3.4.3 Enabling NAT

To enable NAT between the internal (LAN) and external (WAN) interfaces of the Firewall:
a. From the left-hand menu, click on Configuration>Security. The Security Interface
Configuration page is displayed.
Refer to the figure-18.
b. At the Security Interfaces section, click on the Enable NAT to internal interfaces button
LDK24 ADSL Router User's Manual
Version 1.0D
<figure -22>
<figure -23>
Copyright© 2002 LG Electronics Inc., LTD.
Page 31 of 67