How To Fill The Salt Reservoir - Miele G 7881 Installation And Operating Instructions Manual

Water softener

How to fill the salt reservoir

Only use special, coarse-grained, Miele
reactivation salt with a grain size of
1 - 4 mm. NEVER use other types of
salt, such as table salt, cattle salt or
de-icing salt. These salts can contain
components that are insoluble in water
and could damage the water softener.
The salt reservoir holds
approximately 2.5 kg salt.
,
Inadvertently filling the salt
reservoir with detergent WILL
damage the water softener.
Before filling the reservoir, always
make sure that you are using
reactivation salt.
20
^ Remove the bottom basket from the
machine.
^ Unscrew the salt reservoir cap.
Before filling the salt reservoir for the
first time:
fill the reservoir with approximately
2.5 liters of water, so that the salt
can dissolve properly. Once the
washer-disinfector has been
operated, there will always be
enough water in the reservoir.
^ Place the provided funnel accessory
over the salt reservoir.
^ Carefully fill the reservoir with
reactivation salt.
Some displaced water will run out - this
is normal.