Facsimile Settings (Option)
Setting up the User Parameters
When the machine is not connected to the network (LAN), change the DHCP Default setting to "No". (See
pages 4 to 6)
1
Press the Function key.
2
Select "Fax/Email Settings".
3
Select "04 Key Operator Mode".
4
Enter the Key Operator password (8
digits), and then select "OK".
The default password is "00000000".To
change the password, select "80 Key
Operator Password" in the General
Settings (Key Operator Mode), and then
enter the new password.
To correct a mistake, select "Back Space" to
delete, and enter the correct character.
5
Select "00 User Parameters".
1
2
21