Panasonic SL-CT820 Operating Instructions Manual

Note:
"EB" on the packaging
indicates the United
Kingdom.
EB EG GK GH

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve
the problem, consult your dealer for instructions.
No play. ≥The HOLD function is on. Release HOLD ( page 5).
≥The batteries may be depleted ( page 4).
≥The disc isn't correctly set.
≥The disc is scratched or dirty. (Tracks may be skipped
particularly with WMA/MP3 discs.)
≥There is moisture on the lens. Wait for about an hour
and then try again.
≥The lens is dirty: clean it with a blower (recommended
product: SZZP1038C). If the lens gets marked with
fingerprints, gently wipe them off with a cotton swab.
≥The unit may not read a track properly if shaken
strongly during disc reading.
≥If there is no data between sessions on a multi-session
disc, play may not be possible.
≥If there is a large amount of JPEG data etc. within a WMA/MP3
file, sound may become muted and play may not be possible.
≥If the disc contains data with different formats, sound
may become muted and play may not be possible.
≥If a CD-ROM format disc contains WMA/MP3 and other
files, only the WMA/MP3 files will be playable.
≥You cannot play a WMA disc if the copy protection setting
was on when you made the disc.
≥Some HighMAT discs may not be playable on this unit.
No sound or there ≥Ensure the plugs are inserted firmly.
is a lot of noise. ≥Wipe the plugs with a clean cloth.
≥The sound may be interrupted or there may be noise
when playing WMA/MP3 if the recording quality is poor.
≥The elapsed playing time disappears and sound is
interrupted if bumps continue repeatedly.
≥There is no sound from the earphones if you have
connected the unit to other equipment.
Play doesn't ≥This doesn't work during random play.
resume from the ≥Reselecting the playlist cancels the resume function.
last point stopped. ≥It may not work correctly under some conditions.
Play doesn't start ≥Random play modes may be on ( page 5).
from the first track. ≥Play resumes from where last stopped ( page 5, Play).
(If the lid is opened while the unit is turned off, the resume
function may not be cancelled.)
Cannot search through tracks. You cannot search through a disc with WMA/MP3 files.
Dear Customer
Thank you for purchasing this product.
Before connecting, operating or
adjusting this product, please read
these instructions completely. Please
keep this manual for future reference.
p
GC
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/

Operating Instructions

Portable CD Player
SL-CT820
Windows Media, and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
WMA is a compression format developed
by Microsoft Corporation. It achieves the
same sound quality as MP3 with a file size
that is smaller than that of MP3.
HighMAT
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and
Thomson multimedia.
Cannot specify point A or B. You may not be able to specify point A or B at the end of disc.
If [:] or [9] is pressed before [ $ MEMO/ % DISP]
Cannot change the
Digital Re-master mode, you cannot change the mode.
anti-skip mode.
Digital Re-master Depending on the type of WMA/MP3 disc recording, the
does not work. effect may not appear.
Cannot skip albums. You cannot skip from the last to first album, or vice versa, during play.
Cannot hear the remote The operation tone may be off ( page 5).
control's operation tone.
The remote control ≥Remove the plug and reinsert it as fully as possible.
does not work properly. ≥Use only the included remote control to operate this unit.
The unit beeps Indicates an operation is not possible. Check if anything
rapidly. is preventing it.
Cannot recharge. ≥You aren't using the special rechargeable batteries ( page 4).
≥You must insert two batteries before you can recharge them.
≥The unit must be off before you can recharge.
The AC adaptor becomes This is normal.
warm during recharging.
The batteries are taking The batteries may take as much as 6 hours to recharge
a long time to recharge. under some conditions.
Play time is short ≥This may occur the first time you recharge the batteries
after recharging. or if you haven't used them for a long time. Play time
should be restored after a few recharges.
≥The batteries can go flat if you leave the AC adaptor
connected after recharging is complete.
≥If play is extremely short even after fully recharging the batteries,
the batteries may have exceeded their life (Rechargeable batteries
can be recharged approximately 300 times). Please purchase new
nickel-metal hydride rechargeable batteries (HHF-AZ01/HHF-1P).
The battery indicator ≥The indicator does not appear when the AC adaptor is connected.
fails to appear or is ≥The indicator may not appear correctly when using the rechargeable
incorrect. and dry cell batteries at the same time and under certain conditions.
The unit stops working. Disconnect then reconnect all power sources (batteries and AC adaptor).
Power cuts off. If you connect or disconnect the AC adaptor, the power
1
cuts off even if the rechargeable batteries are inserted.
TM and the HighMAT logo are either
RQT7731-B
F1104SZ0