Recording data on P2 cards
1394 input recording
You can connect a digital video component equipped with a 1394 connector, and digitally record video
signals, audio signals or time codes, etc. on the unit.
AG -H PG
10
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
The thumbnail screen appears.
2
Press [MODE].
The thumbnail display off screen appears.
HD720P
60
C
1
H
C
2
H
3
Press [MENU].
4
Using [STOP], [PLAY] and [STILL], select
the "RECORDING SETUP" – "SYS FORMAT"
setting, press [STILL], and ensure that the
1394 video input image format and the unit's
recording format are the same.
For details, refer to setting menu "RECORDING
SETUP" screen (page 72).
48
Unit
IEEE1394 input/output
connector
1
2
106 mn
1394 cable
(optional accessory)
5
As in step 4, after selecting "RECORDING
SETUP" using [STOP] and [STILL], set the
time code, user's bit and so on.
For details, refer to setting menu "RECORDING
SETUP" screen (page 72).
6
Press the two [REC] buttons together.
Recording now starts.
• To stop the recording, press [STOP].
• While recording is underway, text memos or
shot marks assigned to [USER] (page 74) can
be inserted.
Digital
component