Page 1
Models No. Description 20mm Rotary Hammer ONCEPTION AND MAIN APPLICATIONS 287mm (11-1/4") HR2010 is designed to belooked stronger structure, with traditional "D" handle and some aluminium parts. In overhead horizontal operations, HR2010 has great performance in drilling 6mm-12mm holes. 91mm (3-5/8")
Page 2
HR2010 Shorter overall length makes weight Center closer to handle, and this makes handling easier, with torque-limiter electrical variable switch makes centering job easier rotato change ring to put on or off bits grip can be fixed at any position;...
Page 3
It is fixed by steel ball and leaf spring. Cap 37 Disconnect the roller 7(2 pieces). Change ring Roller 7 1-2. Assembling of chuck Grease the MAKITA grease R No. 1 on the roller 7 and then assemble it.
Page 4
Press 2-1. Disassembling of barrel Remove the hexagon socket bolt M5x20 and then remove the barrel. Tool holder Use the arbor press to press the top of tool holder to Trace of pusher pin remove it. 2-2. Assembling of barrel Assemble in a way that the trace of pusher pin shown on the right figure comes at name plate side.
Page 5
Armature complete (2) Lubricating points To avoid abrasion at earlier stage and heating damage, apply the MAKITA oil XLD on the points shown below. O ring on the impact bolt O ring and groove...
Page 6
To avoid abrasion at earlier stage and heating damage, use the MAKITA grease R No. 00 to grease on the points shown below. Outer circumference of pin5 Outer circumference Teeth face Each teeth face of Helical gear 43, Helical gear 29, spiral...