Inspecting And Cleaning The System; Cleaning Optical Tips - GE XL VU Operating Manual

Maintenance

Inspecting and Cleaning the System

Inspect and clean the XL Vu system before and after each use with a soft
cloth and a 70% alcohol-to-water solution. If using the system in a dirty
environment, clean the components more frequently, as needed.
If damage is found, contact GE Sensing and Inspection Technologies for
return instructions and an RMA (return material authorization) number.
Early detection of minor conditions can prevent costly repair.

Cleaning Optical Tips

Dirty optical tip surfaces cause distorted or blurred images. For best
image quality, clean the optical tip and camera head frequently.
To clean the probe tip, including the lens on the camera head, use glass
cleaner or 70% alcohol-to-water solution and a pointed cotton swab.
Three surfaces need cleaning: the head can optics, the outside of the tip,
and the inside of the tip.
®
XL Vu™ VideoProbe 113