Table of Contents
Advertisement
Product Overview
Specifications
Note: Specifications and design are subject to change
without notice.
Dimensions and Weights (approx.)
Length
34 inches (86.4 cm)
Width
34 inches (86.4 cm)
Height
9.6 inches (24.4 cm) to carrier mount
10–1/2 inches (26.7 cm) at 3/4 inch height of cut
13–3/4 inches (34.9 cm) at 4 inch height of cut
Weight
195 pounds (88 kg)
Attachments/Accessories
A selection of Toro approved attachments and accessories are
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Operation
Note: Determine the left and right sides of the machine
from the normal operating position.
Selecting a Blade
Standard Combination Sail
This blade was designed to provide excellent lift and
dispersion in almost any condition. If more or less lift and
discharge velocity is required, consider a different blade.
Attributes: Excellent lift and dispersion in most conditions.
Angled Sail
The blade generally performs best in lower heights of
cut—3/4 to 2–1/2 inch (1.9 to 6.4 cm).
Attributes:
•
Discharge remains more even at lower heights of cut.
•
Discharge has less tendency to throw left and thus a
cleaner look around bunkers and fairways.
•
Lower power requirement at lower heights and dense turf.
High Lift Parallel Sail
The blade generally performs better in the higher heights of
cut—2 to 4 inch (7 to 10 cm).
Attributes:
•
More lift and higher discharge velocity.
•
Sparse or limp turf is picked up significantly at higher
heights of cut.
•
Wet or sticky clippings are discharged more efficiently
reducing congestion in the deck.
•
Requires more horsepower to run.
•
Tends to discharge further left and can tend to windrow
at lower heights of cut.
WARNING
Do not use the high lift blade with the mulching
baffle. The blade could break, resulting in personal
injury or death.
6
Advertisement
Table of Contents
