Ping Test (9)
1. In the self-test mode, press numeric key "9", then "*".
Ping Transmission
09-
2. Press following IP address by using the numeric keys in order such as
192*100*.
09-192.168.1.100
pinging
3. When the check is complete and if no problems were found, the
following screens will be displayed as shown below:
PING:192.168.1.100
Reply...time=xxms
Reply...time=xxms
Reply...time=xxms
Reply...time=xxms
Ping Complete
Upon the successful completion of the Ping check, LED LE10 and the SPKR
LED will light green.
In case of error, the following screens will be shown:
PING:192.168.1.100
Requested time out
Requested time out
Requested time out
Requested time out
Ping Complete
At this time, LED LE10 will light red. Consult your System Administrator
immediately.
B
B-7