DPX701/701U/701UY DPX-MP7090U COMPONENTS DESCRIPTION ELECTRIC UNIT (X34-413x-xx) Ref. No. Application / Function Operation / Condition / Compatibility IC10 Audio8V Ref Power Supply Output 1.27V. IC80 Switching Regulator Power supply for VFD. (57V) IC100 Reset IC “L” when detection voltage goes below 3.6V or less.
DPX701/701U/701UY DPX-MP7090U COMPONENTS DESCRIPTION Ref. No. Application / Function Operation / Condition / Compatibility Q606,607 AUDIO 10.5V AVR When Q606’s base goes Hi, AVR outputs 10.5V. Q608~615 Pre-out mute SW When a base gose Hi, Pre-out is set to mute.
DPX701/701U/701UY DPX-MP7090U COMPONENTS DESCRIPTION Ref. No. Application / Function Operation / Condition / Compatibility IC15 DSP for Compression Audio Decoder ACDrive decoder, MP3/WMA/AAC decoder IC16 Compression Audio Codec SDRAM Decoder Software & IC17 Unique ID Strage Flash ROM IC18 Audio D-A Converter (24-bit external) External 24-bit for audio 3.3V power supply for µ-com...
Page 7
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Pin No. Pin Name Module Application Processing Operation Description value table 11,12 Not used Output L fixed µCOM BYTE µCOM CNVSS µCOM XCIN 32768kHz µCOM XCOUT 32768kHz µCOM RESET µCOM XOUT 12MHz µCOM µCOM 12MHz µCOM...
Page 8
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Pin No. Pin Name Module Application Processing Operation Description value table SCL/INST_SCL EXTRA I/O E2PROM I2C clock output terminal H: ON, Hi-Z: Momentary power down, PON_PANEL Power supply I/O Panel 5V control terminal 11 min. after ACC_OFF...
Page 9
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Pin No. Pin Name Module Application Processing Operation Description value table µCOM VCC2 EXT_AMP_CON EXTRA I/O EXTERNAL AMP control µCOM 88~91 TYPE_1~4 TYPE Destination switching Refer to the truth value table Not used Output L fixed...
Page 10
Hi-Z Normal reception DPX701 DPX-MP7090U t TUN TYPE setting u Frequency Transition type1 type2 Kenwood brand model K,M Type (10kHz space) Setting for OEM 1 Reception frequency FSEL1 FSEL2 Setting for OEM 2 All status excluding 530~690 AM source Setting for OEM 3...
Page 11
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION PANEL MICROCOMPUTER: 703134AGJ011A (X16 : IC4) Pin No. Pin Name Application Processing Operation Description D14~D8 Data input/output 3.3VDD 3.3V 10~17 D7~D0 Data input/output Control lighting time (brightness tone) with the pulse interval FLGCP1 FL tone control...
Page 12
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION Pin No. Pin Name Application Processing Operation Description CLK_IN2 Serial sync clock input Sync to FL_CLK FL_LAT FL latch control FL_DATA3 FL serial control data SI3 3.3VDD 57,58 X2, X2 Clock input 6.6MHz, internally 66MHz...
Page 13
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION Pin No. Pin Name Application Processing Operation Description Memory data transmission permission L: Send data, H: Wait, Hi-Z when starting up at SW3.3 96,97 Not used Output L fixed 3.3VDD Repeat H and L before finalizing...
Page 14
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION MECHANISM MICROCOMPUTER: M30620FCPGP (X32: IC1) Pin No. Pin Name Application Processing Operation Description Not used Opened output L fixed BYTE External data bus SW input Connects to GND L: Single chip mode CNVSS Processor mode SW...
Page 15
DPX701/701U/701UY DPX-MP7090U MICROCOMPUTER’S TERMINAL DESCRIPTION Pin No. Pin Name Application Processing Operation Description H: Mute ON, L: Mute OFF ZERO M 0-bit mute detection (No distinction of Lch/Rch) DE-EMPHASIS DAC de-emphasis control H: De-emphasis ON, L: De-emphasis OFF 50,51 Not used...
DPX701/701U/701UY DPX-MP7090U TEST MODE How to enter the test mode Forced switching of K3I In order to enter the test mode, reset the unit while simulta- In TUNER FM mode, each time [6] key is pressed, the func- neously pressing down [1] and [3] keys.
Page 17
DPX701/701U/701UY DPX-MP7090U TEST MODE • By pressing [AUD] or [FM] key briefly, switch the item to be Backup current measurement adjusted in the following order. (only in forward rotation) When reset in Acc OFF (Back Up ON) condition, MUTE termi- The initial item will be Fader, which is followed by : Balance nal goes off after 2 seconds, instead of 15 seconds.
Page 18
DPX701/701U/701UY DPX-MP7090U TEST MODE CD information display mode [4] key Key pressed briefly : CD operation time is displayed. (Display) CDTim_0Hxx_ (00~50 is displayed for “xx”. Displays I2C communication status and CD mechanism When less than 1 hour, displayed error log by increments of 10 minutes.)
Page 19
Also, in the above mode, the menu of the STANDBY source “M2P4” – – – NG! will not display DEMO ON/OFF switching items. ∗ Flash ROM (4M) : DPX-U099 (X16 IC1) Mask ROM (2M) : DPX701/701U/701UY/DPX-MP7090U Clearing backup/installer memory and CD mecha- (X16 IC1) nism information, and service information (Clear- 2.
Page 20
DPX701/701U/701UY DPX-MP7090U TEST MODE 2. After the initialization process is completed, the following is Security displayed. • Forced Power ON mode At normal termination: Even when the security is set, by resetting while pressing [Q] key and [4] key simultaneously, it is possible to turn the power...
DPX701/701U/701UY DPX-MP7090U DC OFFSET ERROR 3. Key specification Purpose • No specific limitation (Normal operation). Prevent customers’ vehicle speakers damages, burnouts, and 4. Display specification smoking. • Display the “PROTECT” string and blink all characters at Avoid the connected speakers to be burned out, damaged, or 1Hz.
DPX701/701U/701UY DPX-MP7090U CD LOAD ERROR DETECTION q If the protect timer was counted up before the LOS (SW1) Operation up edge detection, it is recorded as LOAD_ERR1. LOAD w If the protect timer was counted up after the LOS (SW1) up...
DPX701/701U/701UY DPX-MP7090U INSTALLER MEMORY SPECIFICATIONS At specialists (or specialty stores), when the installer sends • The contents read out by the call key shall be reflected only to the current source at the time → EQ curve is “USER” the vehicle back to the user, they may make the store-recom- mended audio configuration.
Page 28
DPX701/701U/701UY DPX-MP7090U PC BOARD (COMPONENT SIDE VIEW) SWITCH UNIT X16-352x-xx (J76-0175-02) X16-352x-xx Ref. No. Address C106 C105 Refer to the schematic diagram for the values of resistors and capacitors.
Page 29
DPX701/701U/701UY DPX-MP7090U PC BOARD (FOIL SIDE VIEW) SWITCH UNIT X16-352x-xx (J76-0175-02) ILL+B CP12 CP10 CP13 CP11 CP20 FROMCHK R100 CP25 X16-352x-xx PANRST Ref. No. Address CP27 SYSDATA CP29 SYSREQ CP30 VDD1 PANRST CP26 CP31 CP28 IC10 IC11 Refer to the schematic diagram for the values of resistors and capacitors.
Page 30
DPX701/701U/701UY DPX-MP7090U PC BOARD (COMPONENT SIDE VIEW) CD PLAYER UNIT X32-5870-00 (J76-0214-02) R121 R116 R118 R348 CP11 IC13 IC18 CP16 R112 C103 R110 R368 IC28 R367 C316 R301 IC16 CP303 CP301 R302 CP300 CP302 R300 C101 IC25 R307 R306 R339...
Page 31
DPX701/701U/701UY DPX-MP7090U PC BOARD (FOIL SIDE VIEW) CD PLAYER UNIT X32-5870-00 (J76-0214-02) IC20 R142 CP10 IC14 R144 R133 R311 CP24 CP25 R138 LOCK SHOCK CP26 IC15 ADCIN HOLD TRK+ MIRR CP27 R312 RF0K CP28 SW3.3 CP30 CP19 CP29 CP57 IC26 SLD+ A.GND...
Page 32
DPX701/701U/701UY DPX-MP7090U (X34-413x-xx) to CORD with BU14.4V ANT. PIN PLUG L400 REAR R TUN GND W401 REAR L PRE OUT (FRONT/REAR) FRONT R W400 ∗ TP401 FRONT L IN/SUB ∗ J600 CN600 RFGND 1 2 3 4 5 6 FMANT...
Page 33
DPX701/701U/701UY DPX-MP7090U BU14.4V BU14.4V A GND A GND REQ M B.U. REQ S 10 DATA S MUTE DATA M A GND C105 C704 0.01 TP108 0.01 R711 IC100 D703 TP803 3.3V 0 or 1.6 or 5.0V 0~5.0V TP100 5.0V D704 VREF 5.0V...
Page 35
DPX701/701U/701UY DPX-MP7090U (X34-41 MODEL to DC CORD DPX701 DPX-MP DPX701 DPX701 SVR+B SVR+B F1 10A DPX-U09 FUSE A GND IC750 TAB1 PWGND1 C764 C760 OFFDET C750 D750 6.8V R760 OUT2- STBY R759 10K D751 6.8V OUT2+ C782 C768 TP18 D752 6.8V...
Page 36
• DC voltages are as measured with a high impedance voltmeter. Values may vary slightly due to variations SIGNAL LINE between individual instruments or/and units. GND LINE B LINE B LINE SW14V DPX701/701U/701UY, DPX-MP7090U (1/2) X34-413x-xx (5/5), X89-2830-10 (1/1)
Page 37
DPX701/701U/701UY DPX-MP7090U 128X23 Pixels/2 Colors (X16-352x-xx) TP104 CORRECTION NOT USED REMOTE 3.3V CONTROL 0.047 R58 2.2K FL3.3V BUFF VCC 3 FL BLK 3.3V 100K 3.3V 2.2K 3.3V 0.01 ∗ 3.3V TP117 100K C109 0.01 3.3V PON TRI RED C105 0.01 C106 0.01...
Page 43
DPX701/701U/701UY DPX-MP7090U EXPLODED VIEW (CD MECHANISM) DPU1 Only for Euro model. 46 : Only for Euro model. DFPC1 Refer to the parts list. (X32) φ : N09-4460-15 M1.7x8 : N09-4472-25 M1.7x2.5 : N09-6004-15 M2x2 : N09-6007-15 φ 2x5(BLK) : N09-6051-15 1.6 WASHER...
DPX701/701U/701UY DPX-MP7090U EXPLODED VIEW (UNIT) Size AA battery (Not supplied) DME1 φ3x5 (X34) N83-3005-48 W400 φ3x8 N83-3008-48 φ3x20 N83-3020-48 φ3x10 N80-3010-48 φ2.6x8 N82-2608-48 (X34) (X89) X89-283 (X89) X34-413 Depends on the model. Refer to the parts list. Parts with the exploded numbers larger than 700 are not supplied.
DPX701/701U/701UY DPX-MP7090U EXPLODED VIEW (PANEL) φ2.6x6 N78-2660-48 φ2x6 N80-2006-48 φ2x8 N80-2008-48 (X16) (X16) X16-352 Parts with the exploded numbers larger than 700 are not supplied.
Digital filter (D/A) ......8 Times Over Sampling DPX-MP7090U ........178 x 100 x 155 mm D/A Converter ..............1Bit DPX701/701U/701UY ......182 x 112 x 160 mm Spindle speed (Audio file) ..........7-3/16 x 4-7/16 x 6-5/16 inch DPX701/701U/701UY ......500~200rpm (CLV) Weight ............