Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any decal that is damaged or lost.
1. Warning—read the
Operator's Manual.
2. Tipping hazard—do not step
off the platform with the load
raised, move the traction unit
with the heavy end up hill,
and the maximum load rating
is 515 lb. (234 Kg).
1. Crushing hazard—install the cylinder lock and read the instructions before servicing or performing maintenance.
2. Warning—remove the ignition key and lower the loader arms before leaving the machine.
3. Cutting hazard of hand—wait for moving parts to stop.
4. Crushing/dismemberment hazard of bystanders—keep bystanders a safe distance from the machine.
5. Explosion and electrical shock hazards—do not dig in areas with buried gas or electrical lines.
100-8824
3. Lower the loader arms.
4. Raise the loader arms.
5. Forward
6. Traction control
100-1701
7. Reverse
8. Dump the bucket.
9. Curl the bucket.
7
10. Engine—start
11. Engine—run
12. Engine—stop