RX-44
Service Software Instructions
12. Enter the serial number of the prommer and select FBUS as the active media to the parameters, if you
want to use NFPD USB (FBUS) connection.
13. Enter the serial port number to the parameters, if you want to use FBUS serial connection.
14. Activate the connection you want to use by clicking it, use up/down arrows to move it on top of the list,
and click Apply.
The connection is now selected and can be used after closing the Manage Connections window. Selected
connection will be shown on the right hand bottom corner of the screen.
Issue 1
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Page 3 –19