2.8.30 [1-1] Slot—Card Property - DID type
The property for the DID card can be specified.
First Dial Timer
Specifies the minimum time that the PBX waits after seizing a DID line, before sending the dialled
digits to the telephone company or to another PBX. This allows the telephone company or the other
PBX to have enough time to accept the dialled digits correctly.
Value Range
32 × n (n=1–255) ms
Maintenance Console Location
2.8.30 [1-1] Slot—Card Property - DID type
Programming Manual References
None
Feature Guide References
None
DTMF Tone—DTMF Inter-digit Pause
Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have
enough time to accept the dialled digits correctly.
Value Range
64 + 16 × n (n=0–11) ms
Maintenance Console Location
2.8.30 [1-1] Slot—Card Property - DID type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse % Break
Specifies the % break for pulse digits. This is the ratio between the break (on-hook) signal and make
(off-hook) signal in a pulse dial.
Value Range
60 %, 67 %
2.8 [1] Configuration
PC Programming Manual
289